Recommended starting point
OMTech 60W CO2 Laser cabinet settings for Natural Slate
These rows are baseline laser settings for Natural Slate on the OMTech 60W CO2 Laser cabinet. Use them to start calibration, then run a small test cut or test engrave on scrap from the same batch before production work.
Calibration table
Use these as starting points for your own machine log.
| Thickness | Action type | Speed mm/s | Power percent | Passes | Air assist |
|---|---|---|---|---|---|
| N/A | engrave | 45 | 80% | 1 | No |
Quick FAQs
Are these OMTech 60W CO2 Laser cabinet settings guaranteed for Natural Slate?
No. Treat them as recommended starting points. Run a small test cut or engrave before you use a full sheet or finished part.
Why does 60W matter?
Wattage affects how much energy can be delivered at a given speed. A lower wattage machine may need slower speed or more passes than a higher wattage machine.
Should I change air assist for Natural Slate?
Follow the row when air assist is listed, then adjust during testing. Air assist can reduce flare-ups and improve cut edges, but some engraving jobs may need less airflow.